dynarex Bari+Max 10670 Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Medizinische Ausrüstung dynarex Bari+Max 10670 herunter. dynarex Bari+Max 10670 4 Seiten. Bariatric air cushion

Seite drucken

CLEANING INSTRUCTIONS

CUSHION

1. Use germicidal soap to wash the cushion.

2. Use a wash cloth to wipe the cushion dry. Do not use detergents

or other solvents.

3. Do not machine wash or tumble dry.

4. Do not heat or steam autoclave.

COVER

1. Wash at 30˚C / 86˚F

2. Do not iron.

3. For single patient use only.

REPAIRING LEAKS

1. Make sure the cushion and all four corners are inﬂated

completely.

2. Immerse the over-inﬂated cushion into water to locate the leak.

(You will see air bubbles rising from the area where the leak

is located.)

3. When the leak has been located, mark the leak.

4. Deﬂate the cushion.

5. Allow the cushion to dry completely.

6. Clean the area around the hole and let the surface dry.

7. Place a patch ﬁlm over the hole.

8. Press the patch ﬁlm down ﬁrmly to seal. Do not use the cushion

for at least 30 minutes.

9. When leak repair is complete, adjust the cushion to proper

inﬂation according to the user manual.

10. Repeat to test if there are any other leaks.

Patches do not change the performance of the cushion, but if your

patch is not successful in solving the problem, or there is more

serious damage, please contact your local provider.

Manufactured for: Dynarex Corporation

10 Glenshaw Street | Orangeburg, NY 10962

USA • www.dynarex.com | Made in China

R220722

SYMBOL GLOSSARY

For an explanation of symbols

used in Dynarex packaging, visit

dynarex.com/symbols.php