Autonics LSE-4A5R2 Handbuch
Blättern Sie online oder laden Sie pdf Handbuch für Sicherheitssensoren Autonics LSE-4A5R2 herunter. Autonics LSE-4A5R2 12 Seiten. 2d laser scanners
Auch für Autonics LSE-4A5R2: Produkthandbuch (5 seiten)
Seite druckenLSE-4A5R2
Laser Scanner
▣ Feature
Activated channel(s) among Ch1 to Ch4
- Monitoring zone setting
- Concentrated monitoring zone setting by channel
Minimum size of the scanning target setting (W×H×L: approx. 5/10/15/20cm per each)
Parameter setting and real-time monitoring by laser scanner program (atLidar)
(Ethernet communication)
Easy parameter setting via the remote control
Emitting property: CLASS1, wavelength band (905nm), max. pulse output power: 75W
Small size (W125×H80.3×L88mm) for various installation environment
Protection structure: IP67 (IEC standard)
Please read "Caution for your safety" in operation
manual before using.
▣ Overview
The laser scanner measures the time (TOF: Time-of-Flight) between radiation and reflection of the laser pulse and the object. It detects
the object distance or obstacles existence.
The laser scanner utilizes for various environment: obstacles detection sensor for subway platform screen door (PSD), industrial door
open/close sensor, security field surveillance sensor, industrial automation field sensor, etc.
Ethernet communication supports to set parameters and real-time monitoring by PC.
Laser radiation
Laser scanner
▣ Manual
For the detail information and instructions, please refer to user manual, and be sure to follow cautions written in the technical descriptions
(catalog, homepage).
Visit our homepage (www.autonics.com) to download manuals.
▣ Laser Scanner Program [atLidar]
atLidar is the laser scanner program that allows installation of the laser scanner,
setting of parameters, and management of monitoring data such as status information.
< System Requirements >
Item
Minimum specifications
System
32bit (×86) or 64bit (×64) processor over 1GHz
Operations
Microsoft Windows 7/8/10
Memory
4GB+
Hard disk
1GB+ of available hard disk space
VGA
Resolution: 1024×768 or higher
※ Laser scanner is connected with atLidar in Ethernet communication.
※ For initial IP address of the laser scanner, refer to the following table.
In order to connect the laser scanner and PC, set IP address of the PC to that of the laser scanner in same subnet.
Item
Laser scanner
Socket
Server
IP address
192.168.0.1
Subnet mask
255.255.255.0
Port
8000
Gateway
192.168.0.2
Reflected laser
Measures the return time
Object
atLidar
Client
IP address of the user PC
255.255.255.0
-
192.168.0.2
Laser Scanner
< atLidar screen >
D-3