Autonomic MMS 5A Setup-Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Server Autonomic MMS 5A herunter. Autonomic MMS 5A 17 Seiten. Mirage media server

The

tab allows you to configure the following options.

Server Settings

These settings allow you to set the your servers name on the network, and change the

default description.

If you change the server's name, you will have to use the new name to access the server

configuration and the Mirage player interface after you save the changes.

For example, if you change your server name to "Daves-MMS", then you would use the

following to access configuration in the future:

http://Daves-MMS/config

Setting Date And Time

These settings allow you to configure the server to automatically update its internal date and

time information from a selection of geographically located NTP (Network Time Protocol)

servers.

In this section, you can configure your servers network connection to automatically use a

network DHCP server to obtain it's IP address and network settings, or you can manually

specify a static IP address and network settings to use.

If you choose to use Manual Configuration be sure to enter the correct settings for IP Address,

Subnet Mask, Gateway, and DNS 1 & 2. If you are unsure how to configure these settings it

would be best to leave your connection set to

administrator.

WARNING

Setting these values incorrectly can prevent the MMS from connecting to your network, and

could make the server unreachable. If this happens, there is a utility available at

autonomic-controls.com/support_faq_mms.php

Logging

This section allows you to upload internal server logs files and, optionally, your media database

if you are instructed by the Autonomic support team. These log files will be sent directly to our

support staff.

The

section contains a link to restart your MMS. Clicking this link will make your MMS

Utilities

unresponsive for 2-3 minutes while it shuts down and restarts itself.

7 of 16

(or

http://Daves-MMS.local/config

or contact your network

Autonomic (DHCP)

which can help you recover.

)

http://www.

Mirage Media Server Set Up