Autool BT360 Schnellstart-Handbuch - Seite 16

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Prüfgeräte Autool BT360 herunter. Autool BT360 19 Seiten. Battery system tester

AUTOOL

Autool BT360 Battery System Tester

This is for the convenience of the maintenance personnel to quickly

know the whole state of the starting system according to the data.

After testing finished, do not shut down the engine, press OK key to

enter Charging Test.

3.6 Charging System and Rectifier Diode Test

When enter the charging test, tester will prompt "Charging Test?"

Press OK key again to start the charging test.

NOTE: Do not shut down the engine during the test. All electrical

appliance and device are in OFF state. Turn on/off any electrical

appliance in the vehicle during the test will affect the accuracy of the

test result.

Tester will do the following tests in a sequence:

Operate accordingly to increase the engine rotating speed to

3000turns or above, and keep for 5 seconds.

Tester starts the charging voltage test after increase rotation

detected.

After the test finished, tester displays the effective charging volts,