Autopilot POOL PILOT SOFT TOUCH Spickzettel für Betrieb, Fehlersuche und Technik

Blättern Sie online oder laden Sie pdf Spickzettel für Betrieb, Fehlersuche und Technik für Beleuchtungsanlagen Autopilot POOL PILOT SOFT TOUCH herunter. Autopilot POOL PILOT SOFT TOUCH 6 Seiten.

Seite drucken

POOL PILOT

TROUBLESHOOTING AND TECHNICAL CHEAT SHEET

1. Output Lights will pulsate to indicate Chlorine production.

a. There are 7 lights to indicate output level.

b. Chlorine Production is based upon an on/off period of a 30-minute cycle.

c. If lights are solid Green this means unit is in rest mode.

d. To increase percentage of chlorine production, press UP ARROW

e. To decrease percentage of chlorine production, press DOWN ARROW

(The lights will display between 1 light up to 7 lights to reflect output level)

2. Flow Light will be Green

a. If Flow light is not on see troubleshooting section.

3. Salt Light will be Green (OK) – unit will produce chlorine

4. If Salt light is Yellow (LOW) add salt until Green Salt light comes on or check with Salt

addition chart for proper amount

5. If Salt light is Red (ADD) ---unit will engage safety cell shut off. Unit will automatically

resume operation when salt is added back to sufficient levels.

6. Pushing the BOOST BUTTON will increase chlorine production to 100% for 24 hours of

accumulative pump run time. The GREEN BOOST LIGHT will stay Solid Green

a. Holding the Boost Button down from Boost OFF mode for 8 seconds will increase the

Boost Cycle to 72 hours of accumulative pump run time. The Green Boost light will

flash

b. After Boost Cycle is complete the unit automatically reverts to the original Setting

c. Depress the Boost button in either Boost mode to deactivate Boost mode.

1/17/03

SOFT TOUCH

NORMAL OPERATING MODE OF SOFT TOUCH

i. The Yellow Salt light comes on at 2500 ppm and unit will still produce chlorine.

i. The Red Salt light comes on below 2000 ppm of salt.

OPERATING,