Actonis DUAL ACTION 18 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Körperpflegeprodukte Actonis DUAL ACTION 18 herunter. Actonis DUAL ACTION 18 17 Seiten.
Auch für Actonis DUAL ACTION 18: Schnellstart-Handbuch (2 seiten)

IMPORTANT: Do not lift your device off your head when moving from front to
back. Your device features a pair of comb teeth that part the hair so the light can
more effectively reach the scalp. You will make a few complete passes over your
scalp within the recommended treatment time.
If you wish to turn off the beep/vibration during the
treatment, press the top laser button once (Figure G).
Your device and laser will remain on. To re-activate beep
and vibration, simply press the laser button twice.
Turn off your device by pressing and holding the power
button (lower button) until indicator light turns off
(Figure H). Store the device in the charging cradle for
future use. You may leave the power cord plugged into
the charging cradle at all times.
Please Note:
It is important to move your device very
slowly. Remember, you are bathing the scalp
with laser light. If you move it too fast, the
treatment will not achieve the optimal results
to promote hair growth.

TROUBLESHOOTING

ANY ATTEMPT TO SELF-SERVICE YOUR DEVICE, UNLESS INSTRUCTED BY ACTONIS
CUSTOMER SERVICE, WILL VOID YOUR WARRANTY.
Actonis has advanced electronics to ensure that the device is working like it is
supposed to and that the proper amount of laser energy is being delivered. If for
some reason you are experiencing difficulties with your device, please try one of the
tips below:
If your device will not turn on
• Make sure your device is fully charged.
• Press the power button for 4 seconds and then the laser button.
• Try another electrical wall outlet.
If your device is turning off during use
• Make sure your device is fully charged.
• Press the power button for 4 seconds and then the laser button.
• Try another electrical wall outlet.
If your device will not turn off
• Press and hold the power button for 4 seconds.
If your device beeps/vibrates irregularly or doesn't beep/vibrate at all
• Press the power button then the laser button.
If your device beeps and vibrates, but you do not see the laser light
• Press the power button then the laser button.
5
LUH018DWEDXXX-00-0723.indd 6
LUH018DWEDXXX-00-0723.indd 6
G
H
7/18/23 1:53 PM
7/18/23 1:53 PM