Actonis DUAL ACTION 18 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Засоби особистої гігієни Actonis DUAL ACTION 18. Actonis DUAL ACTION 18 17 сторінок.
Також для Actonis DUAL ACTION 18: Посібник із швидкого старту (2 сторінок)

Друкувати сторінку

IMPORTANT: Do not lift your device off your head when moving from front to

back. Your device features a pair of comb teeth that part the hair so the light can

more effectively reach the scalp. You will make a few complete passes over your

scalp within the recommended treatment time.

If you wish to turn off the beep/vibration during the

treatment, press the top laser button once (Figure G).

Your device and laser will remain on. To re-activate beep

and vibration, simply press the laser button twice.

Turn off your device by pressing and holding the power

button (lower button) until indicator light turns off

(Figure H). Store the device in the charging cradle for

future use. You may leave the power cord plugged into

the charging cradle at all times.

Please Note:

It is important to move your device very

slowly. Remember, you are bathing the scalp

with laser light. If you move it too fast, the

treatment will not achieve the optimal results

to promote hair growth.

TROUBLESHOOTING

ANY ATTEMPT TO SELF-SERVICE YOUR DEVICE, UNLESS INSTRUCTED BY ACTONIS

CUSTOMER SERVICE, WILL VOID YOUR WARRANTY.

Actonis has advanced electronics to ensure that the device is working like it is

supposed to and that the proper amount of laser energy is being delivered. If for

some reason you are experiencing difficulties with your device, please try one of the

tips below:

If your device will not turn on

• Make sure your device is fully charged.

• Press the power button for 4 seconds and then the laser button.

• Try another electrical wall outlet.

If your device is turning off during use

• Make sure your device is fully charged.

• Press the power button for 4 seconds and then the laser button.

• Try another electrical wall outlet.

If your device will not turn off

• Press and hold the power button for 4 seconds.

If your device beeps/vibrates irregularly or doesn't beep/vibrate at all

• Press the power button then the laser button.

If your device beeps and vibrates, but you do not see the laser light

• Press the power button then the laser button.

LUH018DWEDXXX-00-0723.indd 6

7/18/23 1:53 PM