HighPoint Thunderbolt TurboBox NA211TB Handbuch zur Schnellinstallation - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Gehege HighPoint Thunderbolt TurboBox NA211TB herunter. HighPoint Thunderbolt TurboBox NA211TB 3 Seiten. Expansion enclosure

Seite drucken
HighPoint Thunderbolt TurboBox NA211TB Handbuch zur Schnellinstallation
Thunderbolt
1.
Overview
Based   on   the   most   up-to-date   Thunderbolt
PCIe   architecture,  the  revolutionary  design  of  TurboBox  NA211TB  
allows   different   combinations   of   highP performance   PCIe   addP on  
cards   to   be   attached   to   any   Thunderbolt
through   the   blazing fast   10Gbps   Thunderbolt   interface   to   meet  
professionals'   needs   for   any   demanding   configuration   on  
work.   This   quick   installation   guide   will   help   you   set   up   the  
TM
Thunderbolt
  TurboBox  NA211TB.
2.
Package Checklist
Before  installing  this  unit,  verify  the  package  contains  the  
following  items.
B
TM
Thunderbolt
(2  meters)  x  1
A
TurboBox  x  1
D
User  manual  
CD  x  1
Notify  your  sales  representative  if  any  of  the  above  items  is  
missing  or  damaged.
3.
Panel Layout
1
2
5
TM
PCIe Expansion Enclosure
1. Power--on indicator LE
This  power-­on  indicator  LED  only  shows  the  status  of  power.
TM
  technology   and  
When  TurboBox  is  powered  on,  it  shows  blue.  When  TurboBox
is  powered  off,  it  shows  no  light.
2. Thunderbolt ports
TM
equipped   computer  
No  specific  Thunderbolt
the Thunderbolt
upstream  device,  the  other  port  is  connected  to  downstream
device.
3. PCIe expansion
4. Thumbscrew for loosening/tightening the top cover
5. Power cord receptacle
4.
PCIe  Card  Hardware  Configuration
C
Power  cord  x  1
 cable  
E
Carry  bag  x  1
Slot1 : Thunderbolt
(already fixed inside the TurboBox)
Slot2 : PCIe x8 slot
(open-­type;; supports PCIe card x1/x4/x8/x16)
Slot3 : PCIe x8 slot
(supports PCIe card x1/x4/x8)
Slot4 : PCIe x4 slot
(supports PCIe card x1/x4)
3
4
TM
 port  is  appointedv  when  one  of  
TM
 ports  on  NA211TB  is  connected  to  host  or
inside
4          3          2          1
1          2        3          4
TM
target card
5.
Installation  of  PCIe  Add-­on  Cards  in
NA211TB
Before  proceeding  to  installation  procedure,  
disconnect  the  NA211TB  from  power  source  for  prevention  
of  electric  shock  or  damage  to  PCIe  add-­on  card.
1. Loosen  the  thumbscrew  and  remove  the  top  cover  of
NA211TB.
Step  1
2. Three  PCIe  slots  on  rear  panel  of  NA211TB  are
pre-­covered  by  removable  L-­shape  metal  brackets.
Loosen  the  screw  of  the  removable  L-­shape  metal
bracket,  and  the  installation  of  PCIe  cards  becomes
ready.
Step  2
3. Insert  PCIe  cards  into  proper  PCIe  slots  of  NA211TB
and  tighten  them  with  screws  on  brackets  of  PCIe
cards.
Step  3