Galley Tap IDS 1 Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Küche & Badarmaturen Galley Tap IDS 1 herunter. Galley Tap IDS 1 2 Seiten. Stainless steel deck switch

Seite drucken

PARTS INCLUDED:

A. Threaded body

D. Appliance control box

B. Mounting washer

E. Tubing

C. Mounting nut

1 3/8" INSTALL

DIAMETER HOLE

COUNTERTOP

2 11/16" MAX

COUNTERTOP

THICKNESS

Fit threaded body (A) through install hole on

countertop. (No plumbers putty is required.

The O-ring seals the base).

Made in Italy

TG0818

REQUIRED TOOLS:

#2 Phillips Screwdriver

Slide tubing (E) into tube fitting

at bottom of threaded body (A).

Slide mounting washer (B) and thread the

mounting nut (C) onto threaded body (A).

Tighten mounting nut (C)

snuggly to underside of

counter and securely

tighten mounting nut

screws.

NOTE:

Ensure Galley logo

on base ring is

facing forward

before tightening.

PLUG GARBAGE

DISPOSAL IN HERE

The appliance control box connects into any standard household wall receptacle. Plug your garbage

disposal into one of the outlets on the appliance control box. You may use the additional receptacle

with any device that has a max of a 120V, 1HP motor. Do NOT plug your dishwasher into the appliance

control box. Pressing the remote deck switch will alternately activate or deactivate your disposal and

anything else plugged into the appliance control box.

Model IDS 1

Slide other end of tubing (E)

into tube fitting at bottom

of appliance control box (D).

Make sure tubing is secure.

Made in Italy

TG0817