Galley Tap IDS 1 설치 지침 - 페이지 2
{카테고리_이름} Galley Tap IDS 1에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Galley Tap IDS 1 2 페이지. Stainless steel deck switch
페이지 인쇄PARTS INCLUDED:
A. Threaded body
D. Appliance control box
B. Mounting washer
E. Tubing
C. Mounting nut
1
A
D
E
B
C
3
1 3/8" INSTALL
DIAMETER HOLE
COUNTERTOP
2 11/16" MAX
COUNTERTOP
THICKNESS
Fit threaded body (A) through install hole on
countertop. (No plumbers putty is required.
The O-ring seals the base).
Made in Italy
TG0818
REQUIRED TOOLS:
#2 Phillips Screwdriver
2
Slide tubing (E) into tube fitting
at bottom of threaded body (A).
4
Slide mounting washer (B) and thread the
mounting nut (C) onto threaded body (A).
5
5
Tighten mounting nut (C)
snuggly to underside of
counter and securely
tighten mounting nut
screws.
NOTE:
Ensure Galley logo
on base ring is
facing forward
before tightening.
7
PLUG GARBAGE
DISPOSAL IN HERE
The appliance control box connects into any standard household wall receptacle. Plug your garbage
disposal into one of the outlets on the appliance control box. You may use the additional receptacle
with any device that has a max of a 120V, 1HP motor. Do NOT plug your dishwasher into the appliance
control box. Pressing the remote deck switch will alternately activate or deactivate your disposal and
anything else plugged into the appliance control box.
Model IDS 1
6
Slide other end of tubing (E)
into tube fitting at bottom
of appliance control box (D).
Make sure tubing is secure.
Made in Italy
TG0817