Coraid SR1520 Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Lagerung Coraid SR1520 herunter. Coraid SR1520 7 Seiten. Etherdrive storage

Control Panel and Indicator LEDs

The EtherDrive

Storage shelf is equipped with color LED indicators and buttons located on the front

panel.

Package Contents

•

One CED3U15SS (or CED1U4SS) shelf assembly

•

IEC power cord(s)

•

Two slide out cabinet mounting rail assemblies

•

Screws to mount SATA disk to disk drive trays

Safety Precautions

•

CED3U15SS weighs more than 50 pounds. Use 2 people to lift unit to avoid injury.

•

CED3U15SS has hot swap power modules. Disconnect the power cord from the power

supply module before removing the module.

•

CED3U15SS has hot swap internal fans. Use extreme caution when opening top cover to

replace a fan unit.

•

CED1U4SS has no hot swap serviceable components.

Coraid Inc.

Power On/Off Red Button – Toggles unit power on and off.

Reset Button (recessed) – Pressing reset, causes system to

reboot.

C. Alarm Mute Button – Normally "OFF" Red, turned "ON" only

when Blade has detected a fault and halted, indicating the

Blade must be removed and serviced.

D. Power On Green LED – "ON" Green when unit power is turn

on.

Network Activity Green LED – Flashes "ON/OFF" Green on

any detected Ethernet activity.

High Temperature Alarm Red LED – "ON" Red when chassis

internal temperature exceeds 40°C.

G. Power Supply Fail Alarm Red LED – "ON" Red during power

supply module failed.

Each disk carrier also has two light pipe indicators

to show disk status. Red "On" when disk has failed

and Green "Flashing/On" during disk activity.

Page 3