Coraid SR1520 설치 매뉴얼 - 페이지 3
{카테고리_이름} Coraid SR1520에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coraid SR1520 7 페이지. Etherdrive storage
페이지 인쇄Control Panel and Indicator LEDs
®
The EtherDrive
Storage shelf is equipped with color LED indicators and buttons located on the front
panel.
!
Package Contents
•
One CED3U15SS (or CED1U4SS) shelf assembly
•
IEC power cord(s)
•
Two slide out cabinet mounting rail assemblies
•
Screws to mount SATA disk to disk drive trays
Safety Precautions
•
CED3U15SS weighs more than 50 pounds. Use 2 people to lift unit to avoid injury.
•
CED3U15SS has hot swap power modules. Disconnect the power cord from the power
supply module before removing the module.
•
CED3U15SS has hot swap internal fans. Use extreme caution when opening top cover to
replace a fan unit.
•
CED1U4SS has no hot swap serviceable components.
Coraid Inc.
A.
Power On/Off Red Button – Toggles unit power on and off.
B.
Reset Button (recessed) – Pressing reset, causes system to
reboot.
C. Alarm Mute Button – Normally "OFF" Red, turned "ON" only
when Blade has detected a fault and halted, indicating the
Blade must be removed and serviced.
D. Power On Green LED – "ON" Green when unit power is turn
on.
E.
Network Activity Green LED – Flashes "ON/OFF" Green on
any detected Ethernet activity.
F.
High Temperature Alarm Red LED – "ON" Red when chassis
internal temperature exceeds 40°C.
G. Power Supply Fail Alarm Red LED – "ON" Red during power
supply module failed.
Each disk carrier also has two light pipe indicators
to show disk status. Red "On" when disk has failed
and Green "Flashing/On" during disk activity.
Page 3