Galvin Engineering CliniMix Lead Safe 100.00.71.00 Produkt-Installations-Manualline - Seite 2
Blättern Sie online oder laden Sie pdf Produkt-Installations-Manualline für Sanitärprodukt Galvin Engineering CliniMix Lead Safe 100.00.71.00 herunter. Galvin Engineering CliniMix Lead Safe 100.00.71.00 18 Seiten. Hob mounted thermostatic progressive basin mixer - lever
2.0
SAFETY
®
The CliniMix
Thermostatic Progressive Mixing Valve is a high-performance valve designed to give stable
and dependable operation, provided it is installed, commissioned, operated and maintained as per the
recommendations outlined in this manual. It should be noted however that this valve should not be
considered as an alternative to adequate supervision and duty of care during its use and operation.
Note: The mixing valve, inlet controls, pipe work and the surrounding area may become hot when installed which
may cause burn injuries. Precautions should be taken to ensure that these surfaces cannot cause such
3.0
DESCRIPTION
This manual covers the CliniMix
These are designed to provide water from ambient cold up to a safe maximum temperature for hand
washing. This mixing valve is supplied with integral isolating valves, strainers, check valves and flow
regulators.
The hot side of the body and the inlet is insulated to ensure the body surface is maintained at a safe
temperature when the fitting is in operation.
Avoid using heat for soldering near the mixer inlets to prevent damage to internal components.
ead Safe™ Hob
®
The CliniMix
Lead Safe* DR Brass.
* As 'lead free' is not currently defined y low in Australia and New Zealand, we have ased our definition of ead Safe™ on the requirements of s 4 7 of the USA's Safe Drinking
Water Act (SDWA) and the relevant US standards NSF6 / NSF372. The SD A defines 'lead free' as "not more than a weighted average of 0.25% lead when used with respect to the
wetted surface of pipes, pipe fittings, plum ing fittings and fixtures".
4.0
DIMENSIONS
ead Safe™ Hob
®
Mounted Thermostatic Progressive Basin Mixer -
Mounted Thermostatic Progressive Basin Mixer – Lever is manufactured from
2
Version 2.1, 31
If the mounting hole does not already
exist, mark out and drill the hole in the
bench/trough, as shown in rough-in
dimensions.
st
July 2020 , 2 of 18
injuries.
Lever.