Galvin Engineering CliniMix Lead Safe 100.00.71.00 Ürün Kurulum Manualline - Sayfa 2

Sıhhi Tesisat Ürünleri Galvin Engineering CliniMix Lead Safe 100.00.71.00 için çevrimiçi göz atın veya pdf Ürün Kurulum Manualline indirin. Galvin Engineering CliniMix Lead Safe 100.00.71.00 18 sayfaları. Hob mounted thermostatic progressive basin mixer - lever

Sayfayı Yazdır

2.0

SAFETY

The CliniMix

Thermostatic Progressive Mixing Valve is a high-performance valve designed to give stable

and dependable operation, provided it is installed, commissioned, operated and maintained as per the

recommendations outlined in this manual. It should be noted however that this valve should not be

considered as an alternative to adequate supervision and duty of care during its use and operation.

Note: The mixing valve, inlet controls, pipe work and the surrounding area may become hot when installed which

may cause burn injuries. Precautions should be taken to ensure that these surfaces cannot cause such

3.0

DESCRIPTION

This manual covers the CliniMix

These are designed to provide water from ambient cold up to a safe maximum temperature for hand

washing. This mixing valve is supplied with integral isolating valves, strainers, check valves and flow

regulators.

The hot side of the body and the inlet is insulated to ensure the body surface is maintained at a safe

temperature when the fitting is in operation.

Avoid using heat for soldering near the mixer inlets to prevent damage to internal components.

ead Safe™ Hob

The CliniMix

Lead Safe* DR Brass.

* As 'lead free' is not currently defined y low in Australia and New Zealand, we have ased our definition of ead Safe™ on the requirements of s 4 7 of the USA's Safe Drinking

Water Act (SDWA) and the relevant US standards NSF6 / NSF372. The SD A defines 'lead free' as "not more than a weighted average of 0.25% lead when used with respect to the

wetted surface of pipes, pipe fittings, plum ing fittings and fixtures".

4.0

DIMENSIONS

ead Safe™ Hob

Mounted Thermostatic Progressive Basin Mixer -

Mounted Thermostatic Progressive Basin Mixer – Lever is manufactured from

Version 2.1, 31

If the mounting hole does not already

exist, mark out and drill the hole in the

bench/trough, as shown in rough-in

dimensions.

July 2020 , 2 of 18

injuries.

Lever.