AGS Parksafe Control Panel Handbuch für Installation und Betrieb - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Betrieb für Controller AGS Parksafe Control Panel herunter. AGS Parksafe Control Panel 16 Seiten. Ventilation control panel
Auch für AGS Parksafe Control Panel: Handbuch für Installation und Betrieb (16 seiten), Installation, Betrieb und Wartung (16 seiten), Handbuch für Installation, Betrieb und Wartung (20 seiten)

Installation & Operation Manual

INSTALLATION

The Parksafe control panel is designed for installation into car parking facilities and enclosed

garages. It is designed to be paired with AGS Parksafe Gas Detectors (Nitrogen Dioxide and

Carbon Monoxide) that will be linked via MODBUS back to the control panel and monitor the

connected detectors in numbers up to 16 (per control panel) and automatically control ventilation

systems according to gas levels and an optional temperature level.

The Parksafe will make or break a dry contact internally on OUTPUT 1 and a second contact on

OUTPUT 2. This is to have a live feed to the ventilation system wired through the contact so that the

Parksafe can activate ventilation/ fans, this can either be via a direct live feed or via a run signal.

There is another output relay that will activate after OUTPUT 2 has been activated for an optional

extended period of time. This can be used for a link to the BMS or other external indication device.

The Parksafe also has a 0-10VDC output to allow the panel to drive VSD's based on gas level

outputs. The Parksafe control panel is designed to be located in an office or other suitable area

within a carpark not accessible to the public.

Please refer to your detector manual for important information regarding coverage, location and

positioning including areas and conditions to avoid!

Place the control panel in accordance with regulations ensuring optimum access and monitoring.

The control panel should be located outside of the hazardous area that it is monitoring.

Easy accessibility is required both for status observation and alarm purposes.

Where connections may exceed 500 yards from one control panel – Contact your supplier!

The use of sound strobes are highly recommended!

AGS Parksafe Panel - IOM Iss: 6 10-20

Parksafe