Galvin Engineering GalvinAssist 41985CP Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Hilfe für das Badezimmer Galvin Engineering GalvinAssist 41985CP herunter. Galvin Engineering GalvinAssist 41985CP 5 Seiten. Cp hand shower with inverted lh t 700x1100 ss hygienic grab rail

Seite drucken
Product Installation Guidelines
5. Fit grab rail into wall mount plate and
tighten lock nut firmly.
7. Cradle Installation
-
Fit the shower cradle to the grab rail as
shown.
-
Position the cradle as desired then tighten
the cover of the cradle.
Elbow
9. Connect Flange Wall Outlet Elbow
-
Fit elbow over spigot and secure with grub
screw.
-
Using 2.5mm hex key supplied, tighten 5mm
grub screw.
© Galvin Engineering Pty Ltd
-
-
-
Hex Key
-
the connection is secured, then turn on water
supply. Check for any leaks.
Version 1, 1 June 2022, Page 4 of 5
6. Screw flange cover to wall mount plate.
Flow Regulator
Spigot
8. Connect Flange Wall Outlet Elbow
Apply thread tape to wall spud. When
applying thread tape or sealant to the wall
spud, ensure the opening is not obscured.
Failure to do so may restrict or block the flow
restrictor, affecting the flow of water.
Remove spigot by loosening grub screw in
elbow.
Fit spigot to wall spud, ensuring the flow
regulator is in place and not damaged when
tightening the spigot.
10. Check Shower for correct operation
and leaks
Connect hose and shower head ensuring
th
Version 1, 25
May 2022, Page 4 of 5
Grub Screw