Galvin Specialised Ezy-Wash TF83HJP Produkt-Installations-Manualline
Blättern Sie online oder laden Sie pdf Produkt-Installations-Manualline für Sanitärprodukt Galvin Specialised Ezy-Wash TF83HJP herunter. Galvin Specialised Ezy-Wash TF83HJP 5 Seiten. Pre-rinse tapware
Seite drucken
Ezy-Wash
®
Pre-Rinse Tapware
PRODUCT CODE:
- TF83HJS
- TF83HJP
SPECIFICATIONS
Galvin Specialised recommends the installation of strainers and pressure reducing valves prior to installing
the pre-rinse unit to ensure clean consistent water supply. Debris or poor water quality could cause the
trigger to seize or fail to seal.
This pre-rinse unit has a 6 star WELS rating, the Pot Filler attachments are 0 star to allow fast pot filling.
The hose on these units is not suitable for potable water and should only be used for washing down/
cleaning purposes.
TECHNICAL DATA
Inlet
Outlet
Headworks
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strives to improve their products. Specifications may change without
notice. Higher temperature or pressures could result in premature failure and void the manufacturer's warranty.
TOOLS REQUIRED
Adjustable spanner
Hex key
Power drill
Version 1, 11 July 2017, Page 1 of 5
TF83HJS
½" BSP – Male
TF83HJS
Trigger Spray
TF83HJP
Trigger Spray & Pot Filler
TF83HJS
Jumper Valve
TF83HJP
Jumper Valve
Min
100
Max
500
Min
5
Max
65
TF83HJS
3.5
TF83HJP
15
Chrome
TF83HJP