Galvin Specialised Ezy-Wash TF83HJP Інструкція з монтажу виробу

Переглянути онлайн або завантажити pdf Інструкція з монтажу виробу для Сантехнічний виріб Galvin Specialised Ezy-Wash TF83HJP. Galvin Specialised Ezy-Wash TF83HJP 5 сторінок. Pre-rinse tapware

Galvin Specialised Ezy-Wash TF83HJP Інструкція з монтажу виробу
Ezy-Wash
®
Pre-Rinse Tapware
PRODUCT CODE:
- TF83HJS
- TF83HJP
SPECIFICATIONS
 Galvin Specialised recommends the installation of strainers and pressure reducing valves prior to installing
the pre-rinse unit to ensure clean consistent water supply. Debris or poor water quality could cause the
trigger to seize or fail to seal.
 This pre-rinse unit has a 6 star WELS rating, the Pot Filler attachments are 0 star to allow fast pot filling.
The hose on these units is not suitable for potable water and should only be used for washing down/
cleaning purposes.
TECHNICAL DATA
Inlet
Outlet
Headworks
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strives to improve their products. Specifications may change without
notice. Higher temperature or pressures could result in premature failure and void the manufacturer's warranty.
TOOLS REQUIRED
 Adjustable spanner
 Hex key
Power drill
Version 1, 11 July 2017, Page 1 of 5
TF83HJS
½" BSP – Male
TF83HJS
Trigger Spray
TF83HJP
Trigger Spray & Pot Filler
TF83HJS
Jumper Valve
TF83HJP
Jumper Valve
Min
100
Max
500
Min
5
Max
65
TF83HJS
3.5
TF83HJP
15
Chrome
TF83HJP