AgSense Crop Link Lite Verdrahtungshinweise - Seite 8
Blättern Sie online oder laden Sie pdf Verdrahtungshinweise für Messgeräte AgSense Crop Link Lite herunter. AgSense Crop Link Lite 12 Seiten. 2017-18 4-20ma inputs and scaled voltage inputs
Auch für AgSense Crop Link Lite: Verdrahtungshinweise (12 seiten)
Seite drucken1. Wire colors likely will be different in your application, please compare your sensor colors
to the sensor functions listed below, and do not solely rely on the colors shown above!
2. The sensor or voltage source connected must not exceed 6v DC Max!
3. Install the Signal / DC Voltage wire into the Analog input as shown with the red wire
example above (can use Analog 1, 2, 3 or 4).
4. Install the Ground wire from the Sensor / Voltage Source into the GND terminal as
shown with the black wire example above.
5. Remember to log into the user website, and select the Scaled Voltage Input from the
dropdown in the Config page for this unit, and fill in the min/max voltages this
Sensor/Voltage source will have, and what the scaled value and units this reflects, and
then save the settings.
Scaled Voltage Input Wiring
Page 5