AgSense Crop Link Lite 배선 지침 - 페이지 8

{카테고리_이름} AgSense Crop Link Lite에 대한 배선 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AgSense Crop Link Lite 12 페이지. 2017-18 4-20ma inputs and scaled voltage inputs
AgSense Crop Link Lite에 대해서도 마찬가지입니다: 배선 지침 (12 페이지)

페이지 인쇄

1. Wire colors likely will be different in your application, please compare your sensor colors

to the sensor functions listed below, and do not solely rely on the colors shown above!

2. The sensor or voltage source connected must not exceed 6v DC Max!

3. Install the Signal / DC Voltage wire into the Analog input as shown with the red wire

example above (can use Analog 1, 2, 3 or 4).

4. Install the Ground wire from the Sensor / Voltage Source into the GND terminal as

shown with the black wire example above.

5. Remember to log into the user website, and select the Scaled Voltage Input from the

dropdown in the Config page for this unit, and fill in the min/max voltages this

Sensor/Voltage source will have, and what the scaled value and units this reflects, and

then save the settings.

Scaled Voltage Input Wiring

Page 5