Dynojet POWER VISION PV3-1612C Handbuch installieren - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch installieren für Automobilelektronik Dynojet POWER VISION PV3-1612C herunter. Dynojet POWER VISION PV3-1612C 8 Seiten. For 2017-2023 honda pioneer 500; 2021-2024 honda pioneer 520; 2017-2024 honda pioneer 70; 2016-2021 honda pioneer 1000
Seite druckenVIEWING THE VEHICLE INFORMATION
This menu allows you to view the device status (paired/not
paired), VIN #, Model ID, ECU serial number, tune compat, and
checksum compat.
Select Vehicle Tools>Vehicle Information.
VIEWING THE DIAGNOSTIC CODES
This menu allows you to read and clear diagnostic trouble
codes.
1
To read codes, select Vehicle Tools>Diagnostics>Active
Codes.
2
To clear codes, select Vehicle Tools>Diagnostics>Clear
Codes.
RESTORING THE ECU
This menu allows you to restore the ECU. Use Restore ECU if
the device does not complete the flash or if your vehicle will
not start.
Select Vehicle Tools>Restore ECU.
RESET ADAPTIVES
This menu allows you to clear the trims which the narrowband
sensor has learned throughout prior drive cycles.
Select Vehicle Tools>Reset Adaptives.
RELEARN DCT
Use Relearn DCT when the MT/AT shift lights are illuminated
solid on the dash or if the vehicle's transmission needs service
or a module was replaced. The DCT relearned sequence does
not show up right away.
1
Verify the vehicle is up to operating temperature.
2
Select Vehicle Tools>Relearn DCT.
VIEWING THE DEVICE INFORMATION
This menu allows you to view the device firmware version,
serial number, and stock code.
Select Device Tools>Device Information.
4 INSTALLATION GUIDE 98200126
VEHICLE TOOLS
VEHICLE INFORMATION
DIAGNOSTICS
DELETE DATA LOGS
VEHICLE TOOLS
VEHICLE INFORMATION
DIAGNOSTICS
DELETE DATA LOGS
VEHICLE TOOLS
DIAGNOSTICS
DELETE DATA LOGS
RESTORE ECU
DEVICE INFORMATION
DYNOJET POWER VISION
FW VERSION: 5.16.8297.41698
SERIAL NUMBER: PV00029757
STOCK CODE: 76125082
4 HONDA