Dynojet POWER VISION PV3-1612C Handbuch installieren - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch installieren für Automobilelektronik Dynojet POWER VISION PV3-1612C herunter. Dynojet POWER VISION PV3-1612C 8 Seiten. For 2017-2023 honda pioneer 500; 2021-2024 honda pioneer 520; 2017-2024 honda pioneer 70; 2016-2021 honda pioneer 1000

Seite drucken

SET DYNO MODE (FOR MODELS WITH DCT)

This menu allows you to have the vehicle ignore the front

wheel speed sensor(s) for stationary dyno tuning while

allowing the transmission to shift as normal.

Select Vehicle Tools>Set Dyno Mode.

CONFIGURING GAUGES

This menu allows you to configure up to four different gauge

screens. Each gauge screen has four configurable channels.

From the Main Menu, select Device Tools > Configure Gauges.

Select a gauge screen and press Enter.

Select a channel and press Enter.

Select a channel from the list and press Enter.

Select the precision or units for that channel and press Enter.

Continue setting up the remaining channels as desired.

Continue configuring the remaining gauge screens as desired.

LOGGING DATA

Press the Log button to begin logging. The Power Vision

screen will illuminate a bright red banner across the top when

logging.

Press the Log button again to stop logging.

Use the Power Core software to view log files.

Snapshot Log: Press and hold the Log button for two

seconds to record the previous two minutes of operating time.

DELETING DATA LOGS

This menu allows you to delete data logs.

Select Vehicle Tools>Delete Data Log.

Select a specific log to delete or select *Delete All Logs*.

VEHICLE TOOLS

DIAGNOSTICS

DELETE DATA LOGS

RESTORE ECU

5 HONDA