Airelectronics U-Ground Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Computer Hardware Airelectronics U-Ground herunter. Airelectronics U-Ground 13 Seiten. Uav autopilots

U-Ground OneBoard User Manual - General System Introduction
All the U-Pilot configuration is done by Airelectronics staff so the End User does not have to
waste any time setting the internal parameters of the system.
1.1
1.1

Concept of system operation

Concept of system operation
The system is made up of an U-Pilot installed on an aircraft connected to the U-Ground through
a radio link. (See figure 1 attached below)
The U-Ground has its own radio link to communicate with the U-Pilot. It also has an RS-232
output to relay the data to a PC running U-See to allow control from the End User.
A Futaba Joystick allows manual override and control.
The mission team usually is formed by two persons:
The External Pilot who will have the Futaba Joystick on its hands, in case a manual
control of the UAV is desired (specially during the development and adjustment phase).
The U-See operator that will command the mission using the PC.
Figure 1: System concept
4