Deaf Bonce Buran Series Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Deaf Bonce Buran Series herunter. Deaf Bonce Buran Series 16 Seiten. Coaxial speaker
Seite drucken
M i x e d c o n n e c t i o n o f t h e s p e a k e r s
S e l e c t i o n o f t h e d i a m e t e r o f s p e a k e r c a b l e s
Use the table below to select the desired diameter based on the length and the power consumption.
4 . F I L T E R I N G , R E C O M M E N D E D A M P L I F I E R S E T T I N G S
The correct choice of amplifier, its settings, filtering and enclosure largely influence on the lifespan of your audio system. You
should select an amplifier with a nominal power, not exceeding the nominal power of the speakers. Proper coordination of the
head unit (HU) with the amplifier will allow to get a clean, undistorted signal applied to the component to prevent overheating
and voice coil damage. Recommended settings of the amplifier and HU: Volume of HU should not exceed 80%. The amplifier
sensitivity should be set to 50%.
The recommended filter settings:
The high pass filter HPF (the filter that cuts all frequencies below those set for the filter) should be set to 50-80 Hz
(24 dB/Oct), or 80-120 Hz (12 dB/Oct).
The low pass filter LPF (the filter that cuts all frequencies above those set for the filter) should be turned off.
Recommended amplifiers: ABR-240.4, ABR-360.4, ABR-460.4, ATU-600.4, ATU-1000.4.
CAUTION!!! High sound pressure can damage your health!
Please use the common sense when controlling volume!
Voice coil
4 Ohm х 4
5
EN
Total impedance
4 Ohm