Deaf Bonce Buran Series Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Deaf Bonce Buran Series. Deaf Bonce Buran Series 16 сторінок. Coaxial speaker

M i x e d c o n n e c t i o n o f t h e s p e a k e r s

S e l e c t i o n o f t h e d i a m e t e r o f s p e a k e r c a b l e s

Use the table below to select the desired diameter based on the length and the power consumption.

4 . F I L T E R I N G , R E C O M M E N D E D A M P L I F I E R S E T T I N G S

The correct choice of amplifier, its settings, filtering and enclosure largely influence on the lifespan of your audio system. You

should select an amplifier with a nominal power, not exceeding the nominal power of the speakers. Proper coordination of the

head unit (HU) with the amplifier will allow to get a clean, undistorted signal applied to the component to prevent overheating

and voice coil damage. Recommended settings of the amplifier and HU: Volume of HU should not exceed 80%. The amplifier

sensitivity should be set to 50%.

The recommended filter settings:

The high pass filter HPF (the filter that cuts all frequencies below those set for the filter) should be set to 50-80 Hz

(24 dB/Oct), or 80-120 Hz (12 dB/Oct).

The low pass filter LPF (the filter that cuts all frequencies above those set for the filter) should be turned off.

Recommended amplifiers: ABR-240.4, ABR-360.4, ABR-460.4, ATU-600.4, ATU-1000.4.

CAUTION!!! High sound pressure can damage your health!

Please use the common sense when controlling volume!

Voice coil

4 Ohm х 4

Total impedance

4 Ohm