AGT INDUSTRIAL AGT-ST4040C Produkthandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Produkthandbuch für Industrielle Ausrüstung AGT INDUSTRIAL AGT-ST4040C herunter. AGT INDUSTRIAL AGT-ST4040C 10 Seiten. 40ft x 40ft container roof shelter

Seite drucken

Step 2 : Place the containers making sure they are parallel and the correct width

apart. Make sure there is a gap of about 3 feet around the building. the center

point of the round pipe of the base is the reference point, and the diagonal X and

Y must be equal. The bottom plate should be installed on the top of the container

on the same level to ensure a firm and reliable installation.

Parts used in this step. (refer to figure 1)



- (2) Baseplate for front and rear truss left corners (#6L)

- (2) Baseplate for front and rear truss right corners (#6R)

- (10) Baseplates for middle truss (#6)

- (14) Base clamp connector (#6A)

- (24) Base tube connecting plate (#6B)

- (48) Hex bolt (#14)

Figure 1