Deagostini MODEL SPACE Honda CB750 FOUR Montageanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug Deagostini MODEL SPACE Honda CB750 FOUR herunter. Deagostini MODEL SPACE Honda CB750 FOUR 16 Seiten. Pack 12
Auch für Deagostini MODEL SPACE Honda CB750 FOUR: Montageanleitung (16 seiten), Montageanleitung (16 seiten), Montageanleitung (20 seiten), Montageanleitung (16 seiten), Montageanleitung (16 seiten), Montageanleitung (16 seiten), Montageanleitung (16 seiten)

Seite drucken
Deagostini MODEL SPACE Honda CB750 FOUR Montageanleitung
4
Fit the holes in caliper A's mounting
bracket onto the projections on the fork.
8
Insert the projection of the brake disc into
the notch in the hub.
5
Press caliper A firmly into place, so that it is
flush with the fork.
9
Hold the wheel flat, as shown, then press
down on the centre of the disc so that it
sits securely in place.
6
Gap
Check that the caliper looks like this from
the rear, with the circled holes aligned.
10
Put all the parts you didn't use – screws
(type N), screws (type U), front wheel axle
nut and front wheel axle – into a plastic
bag labelled with the stage number and
store it safely until the parts are needed.
Keep the cross wrench with your tools.
Honda CB750 FOUR: Assembly Guide
7
Locate the projection on the front brake
disc (circled) and the corresponding notch
in the front wheel hub.
Stage complete
41