Deagostini MODEL SPACE Honda CB750 FOUR 조립 설명서 - 페이지 9
{카테고리_이름} Deagostini MODEL SPACE Honda CB750 FOUR에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Deagostini MODEL SPACE Honda CB750 FOUR 16 페이지. Pack 12
Deagostini MODEL SPACE Honda CB750 FOUR에 대해서도 마찬가지입니다: 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (20 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지)
페이지 인쇄
4
Fit the holes in caliper A's mounting
bracket onto the projections on the fork.
8
Insert the projection of the brake disc into
the notch in the hub.
5
Press caliper A firmly into place, so that it is
flush with the fork.
9
Hold the wheel flat, as shown, then press
down on the centre of the disc so that it
sits securely in place.
6
Gap
Check that the caliper looks like this from
the rear, with the circled holes aligned.
10
Put all the parts you didn't use – screws
(type N), screws (type U), front wheel axle
nut and front wheel axle – into a plastic
bag labelled with the stage number and
store it safely until the parts are needed.
Keep the cross wrench with your tools.
Honda CB750 FOUR: Assembly Guide
7
Locate the projection on the front brake
disc (circled) and the corresponding notch
in the front wheel hub.
Stage complete
41