Maisi M20 Schnellstart-Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Camcorder Maisi M20 herunter. Maisi M20 17 Seiten.

Seite drucken

Date Stamp Setting

ADAS Detect

Loop Setting

Time Zone

AE Bias

Speed

Warning

Setting

LED Setting

G-Sensor Setting

Motion Detection

Menu Options

Language Setting

Record Mode Setting

[On/Off]

When it is ON, model number/speed/plate number/date/time (preset)

will be shown at the right bottom corner of the screen and will appear

on the recording files.

[On / Off]

ADAS stands for Advanced Driver Assistance Systems, which

including:

Lane-Departure-Warning-System:

warning picture will appear to warn the driver;

B: Low-Light-Warning-System: t will remind you to turn on the

headlight if you drive in low-light condition

C: Driver-Fatigue-Warning-System: device will send a warning

picture and warning tone to the driver when continuous driving (more

than 4 hours) is detected, followed by the same every two hours.

[1min/3min/5min]

The device will generate a file every 1min/3min/5min. Once the

capacity is full, the oldest file will be overwritten. A 32GB SD card can

record continuously for around 3 hours at the best resolution 1296P

before the capacity is full.

[-12~+12]

Set the time zone for different country. "+0" for London.

[-2.0EV~+2.0EV]

Adjust the EV value to make the footage or snapshot brighter or

dimmer.

[Off/80KMH/120KMH]

If the driving speed exceed the preset value, the camcorder will give

out alarm to warn the deriver. Note: this feature is only available with

GPS dongle inserted.

[On/Off]

If set to Off, the LED light on the buttons will turn off.

[Off/Low/Medium/High]

This refers to the sensitivity. Under G-Sensor mode, when an impact

is detected the footage will be saved anyways.

[On/Off]

Under Motion Detection mode, the camcorder records automatically

when it senses movement in front of it. Please disable it when

driving.

System settings

Available options

[English/Russian/Simplified Chinese/Traditional Chinese]

[Auto Record/Manual Record]

When set to Auto Record, the camcorder will automatically start

recording when the car starts up; when set to Manual Record, you

will need to press the power button to turn on the camcorder.

Page 9 of 16

lane-changing

occurs,