Maisi M20 Manuale di avvio rapido - Pagina 10

Sfoglia online o scarica il pdf Manuale di avvio rapido per Videocamera Maisi M20. Maisi M20 17.

Stampa la pagina

Date Stamp Setting

ADAS Detect

Loop Setting

Time Zone

AE Bias

Speed

Warning

Setting

LED Setting

G-Sensor Setting

Motion Detection

Menu Options

Language Setting

Record Mode Setting

[On/Off]

When it is ON, model number/speed/plate number/date/time (preset)

will be shown at the right bottom corner of the screen and will appear

on the recording files.

[On / Off]

ADAS stands for Advanced Driver Assistance Systems, which

including:

Lane-Departure-Warning-System:

warning picture will appear to warn the driver;

B: Low-Light-Warning-System: t will remind you to turn on the

headlight if you drive in low-light condition

C: Driver-Fatigue-Warning-System: device will send a warning

picture and warning tone to the driver when continuous driving (more

than 4 hours) is detected, followed by the same every two hours.

[1min/3min/5min]

The device will generate a file every 1min/3min/5min. Once the

capacity is full, the oldest file will be overwritten. A 32GB SD card can

record continuously for around 3 hours at the best resolution 1296P

before the capacity is full.

[-12~+12]

Set the time zone for different country. "+0" for London.

[-2.0EV~+2.0EV]

Adjust the EV value to make the footage or snapshot brighter or

dimmer.

[Off/80KMH/120KMH]

If the driving speed exceed the preset value, the camcorder will give

out alarm to warn the deriver. Note: this feature is only available with

GPS dongle inserted.

[On/Off]

If set to Off, the LED light on the buttons will turn off.

[Off/Low/Medium/High]

This refers to the sensitivity. Under G-Sensor mode, when an impact

is detected the footage will be saved anyways.

[On/Off]

Under Motion Detection mode, the camcorder records automatically

when it senses movement in front of it. Please disable it when

driving.

System settings

Available options

[English/Russian/Simplified Chinese/Traditional Chinese]

[Auto Record/Manual Record]

When set to Auto Record, the camcorder will automatically start

recording when the car starts up; when set to Manual Record, you

will need to press the power button to turn on the camcorder.

Page 9 of 16

lane-changing

occurs,