HIKVISION AE-VC1B11-ISF Installationshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Installationshandbuch für Sicherheitskamera HIKVISION AE-VC1B11-ISF herunter. HIKVISION AE-VC1B11-ISF 13 Seiten. Mobile network camera
Seite drucken
Preparations
When unpacking and wiring the camera, make sure that the power is off.
Before installation, first survey and inspect the installation site and the wires to secure the safety
and steadiness of the power and wire.
Avoid heat source and install the camera where the heat dissipation is good.
Install the camera horizontally.
Prepare anti-static gloves, cross screwdriver, M3 hexagon wrench and T10T20 box wrench.
Install the camera at the position above the dashboard, in front of the face of the driver and make
sure that the camera will not block the vision of the driver.
Make sure that the steering wheel will not block the camera capturing the shoulder and head of
the driver.
Camera Installation
The TF card is for local storage of the recording, capture and alarm.
Prerequisite: TF card. (Optional)
Use the T10 end of the T10T20 box wrench to loose the screw and open the cover of TF card
slot.
Mobile Network Camera • Installation Guide
Chapter 2 Installation
9