HIKVISION AE-VC1B11-ISF 설치 매뉴얼 - 페이지 10

{카테고리_이름} HIKVISION AE-VC1B11-ISF에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION AE-VC1B11-ISF 13 페이지. Mobile network camera

When unpacking and wiring the camera, make sure that the power is off.

Before installation, first survey and inspect the installation site and the wires to secure the safety

and steadiness of the power and wire.

 Avoid heat source and install the camera where the heat dissipation is good.

 Install the camera horizontally.

Prepare anti-static gloves, cross screwdriver, M3 hexagon wrench and T10T20 box wrench.

Install the camera at the position above the dashboard, in front of the face of the driver and make

sure that the camera will not block the vision of the driver.

Make sure that the steering wheel will not block the camera capturing the shoulder and head of

the driver.

The TF card is for local storage of the recording, capture and alarm.

Prerequisite: TF card. (Optional)

Use the T10 end of the T10T20 box wrench to loose the screw and open the cover of TF card

slot.

Mobile Network Camera • Installation Guide

Chapter 2 Installation