Bristan Descent DSC FSBSM C Installationsanleitung Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Sanitärprodukt Bristan Descent DSC FSBSM C herunter. Bristan Descent DSC FSBSM C 16 Seiten. Tap
Auch für Bristan Descent DSC FSBSM C: Installationsanleitung und Benutzerhandbuch (16 seiten)
Seite drucken
Installation
Basin Mixer / 1 Hole Bath Filler
1. Screw the flexi tails into the bottom of
the body by hand only (DO NOT
OVERTIGHTEN).
2. Feed the flexi tails through the hole
in the basin / bath, ensuring the washer
is fitted between the tap body and fixing
surface to ensure a water tight seal.
3. Screw the fixing rods into the bottom
of the tap body. Slide the 'C' shaped
rubber washer and 'C' shaped metal
washer onto the fixing rods up to the
underside of the basin / bath.
4. To secure the tap body in place tighten
the fixing nuts onto the fixing rods until
the are fully tightened against the
'C' shaped metal washer. The fixing nuts
can be tightened with a suitable spanner.
5. Connect the flexi tails to the hot and
cold water supplies.
6. Turn on both water supplies,
operate the handle in both directions,
letting the water flow for a few minutes to
flush through the system.
7. Fit the clicker waste (for basin mixer
only) ensuring the rubber washer is fitted
between the basin and the waste. Place
the other rubber washer under the basin
and secure by tightening the backnut, in
order to fill the basin, the button in the
middle of the waste needs to be pressed
down. To release the water, press the but-
ton again.
8. Check all joints and connections for any
leaks.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
9