Bristan IRBS1-CP Installationsanleitung und Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Installationsanleitung und Benutzerhandbuch für Sanitärprodukt Bristan IRBS1-CP herunter. Bristan IRBS1-CP 20 Seiten. Infrared automatic basin spouts
Seite drucken
Installation Requirements
Electrical Connections
Regulations: The electrical installation
must be carried out in accordance with
the national electrical regulations and
installed by a qualified person.
Safety: In the interests of electrical
safety a 30 mA residual current device
(R.C.D not supplied) should be installed
in the supply circuit. This may be part of
a consumer unit or a separate unit.
Before starting work on the electrical
supply ensure the power supply is
isolated.
DO NOT allow the supply cord to
contact hot surfaces. The cord should
be safely routed and secured by cable
clips.
Connections: The power supply box
must be permanently connected to the
fixed wiring of the mains supply using
the factory fitted supply cord, via a
switched fused spur off the ring main.
The wires in the mains lead are coloured
in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your
connection unit proceed as follows;-
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter 'N' or is coloured
black.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
8
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter 'L' or is coloured
red.
N
L
Fuse: This following fuse size should be
used.
Model
IRBS1-CP
IRBS2-CP
IRWS1-CP
Supply Cord Replacement
If the supply cord is damaged, it must
be replaced by a genuine Bristan supply
cord. Contact Bristan Customer Services
on 0330 026 6273 to request new spare
parts.
Fuse Size
(AMPS)
3
3
3