Bristan IRBS1-CP Installationsanleitung und Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installationsanleitung und Benutzerhandbuch für Sanitärprodukt Bristan IRBS1-CP herunter. Bristan IRBS1-CP 20 Seiten. Infrared automatic basin spouts
Seite drucken
Installation
IRBS1-CP
1. Fit The Spout
Fit the spout to the sink / work surface
ensuring the sensor cable is threaded
through the hole in the sink / work
surface.
Important: It is advised
to ensure that the
product is at least
360mm away from
reflective surfaces to prevent the tap
from automatically switching on and off.
2. Secure Spout to Sink/Work Surface
Thread the rubber washer and metal
washer onto the fixing rod up to the
underside of the sink/work surface.
Secure the spout in place by screwing
the fixing nut onto the fixing rod.
Tighten the fixing nut using a suitable
spanner.
3. Connect Sensor Cable
Go to the 'Electrical Connections'
section.
4. Connect Water Supplies
Screw the flexi hose into the bottom of
the fixing rod, ensuring it is tightened
fully by hand only.
Connect the flexi hose to the
power supply box. Go to the 'Water
Connections' section.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
Sensor
Cable
Sensor
Cable
Flexi Hose
9