Adexi WH0270A Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Wetterstation Adexi WH0270A herunter. Adexi WH0270A 16 Seiten.

2.4.2 Sensor Operation Verification

Verify the indoor and outdoor temperature

match closely with the console and

sensor array in the same location (about

2 to 3 m apart). The sensors should be

within ± 1 °C. Allow about 30 minutes for

both sensors to stabilize.

3 WIRELESS SENSOR

INSTALLATION

It is recommended you mount the remote

sensor in a shaded area. Direct sunlight

and radiant heat sources will result

in inaccurate temperature readings.

Although the sensor is water resistant, it

is best to mount in a well-protected area,

such as under an eve.

3.1 MOUNTING WITH ZIP TIE

Note: The console has two buttons for

easy operation: °C / °F button (on the

left), and High / Low Record button (on

the right).

4.1 TEMPERATURE UNITS OF

MEASURE

To change the temperature units of

measure, press the °C / °F button (on the

left).

4.2 HIGH LOW RECORD

4.2.1 Check history High / Low

record

In normal mode, the station will display

the history high/low records for indoor/

outdoor temperature and indoor humidity

since power on or last clear.

Long press HI&LOW button 5 s to clear

current high/low record.

4.2.2 Check latest 24 hours High /

Low record

In normal mode, short press HI/LOW

button (the "HI/LOW 24 HR" icon will

appear) to check the latest 24 hours

High / Low record for indoor/outdoor

temperature and indoor humidity.

Long press HI&LOW button 5 s to clear

current high/low record.