ページを印刷する2.4.2 Sensor Operation Verification
Verify the indoor and outdoor temperature
match closely with the console and
sensor array in the same location (about
2 to 3 m apart). The sensors should be
within ± 1 °C. Allow about 30 minutes for
both sensors to stabilize.
3 WIRELESS SENSOR
INSTALLATION
It is recommended you mount the remote
sensor in a shaded area. Direct sunlight
and radiant heat sources will result
in inaccurate temperature readings.
Although the sensor is water resistant, it
is best to mount in a well-protected area,
such as under an eve.
3.1 MOUNTING WITH ZIP TIE
UK
4 CONSOLE OPERATION
Note: The console has two buttons for
easy operation: °C / °F button (on the
left), and High / Low Record button (on
the right).
4.1 TEMPERATURE UNITS OF
MEASURE
To change the temperature units of
measure, press the °C / °F button (on the
left).
4.2 HIGH LOW RECORD
4.2.1 Check history High / Low
record
In normal mode, the station will display
the history high/low records for indoor/
outdoor temperature and indoor humidity
since power on or last clear.
Long press HI&LOW button 5 s to clear
current high/low record.
4.2.2 Check latest 24 hours High /
Low record
In normal mode, short press HI/LOW
button (the "HI/LOW 24 HR" icon will
appear) to check the latest 24 hours
High / Low record for indoor/outdoor
temperature and indoor humidity.
Long press HI&LOW button 5 s to clear
current high/low record.
11