Gamma Progression ST II Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma Progression ST II herunter. Gamma Progression ST II 17 Seiten.
Auch für Gamma Progression ST II: Benutzerhandbuch (19 seiten)
Seite drucken
ASSEMBLY INSTRUCTIONS
Installing the Tensioner
Remove the button head screw and washer located at
the end of the tensioner bar with the 3 mm hex wrench
provided. Slide the tensioner onto the bar, being careful
to align the bar with all of the bearings and the drive gear
with the gear track. Replace the screw and washer into
the end of the tensioner bar.
Note: The tensioner bar is equipped with a tensioner
travel stop to limit travel of the tensioner along the bar.
See page 7 for more details about this feature.
Locking the Turntable
The turntable may be locked in any position.
The turntable winged lock knob is packed separately in
the accessory polybag. Install the lock knob into the
threaded hole located on the side of the tensioner bar
post.
Rotate the knob clockwise to lock the turntable, and
counter-clockwise to release the turntable.
4