Gamma Progression ST II 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Gamma Progression ST II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Progression ST II 17 페이지.
Gamma Progression ST II에 대해서도 마찬가지입니다: 소유자 매뉴얼 (19 페이지)

페이지 인쇄
Gamma Progression ST II 소유자 매뉴얼
ASSEMBLY INSTRUCTIONS
Installing the Tensioner
Remove the button head screw and washer located at
the end of the tensioner bar with the 3 mm hex wrench
provided. Slide the tensioner onto the bar, being careful
to align the bar with all of the bearings and the drive gear
with the gear track. Replace the screw and washer into
the end of the tensioner bar.
Note: The tensioner bar is equipped with a tensioner
travel stop to limit travel of the tensioner along the bar.
See page 7 for more details about this feature.
Locking the Turntable
The turntable may be locked in any position.
The turntable winged lock knob is packed separately in
the accessory polybag. Install the lock knob into the
threaded hole located on the side of the tensioner bar
post.
Rotate the knob clockwise to lock the turntable, and
counter-clockwise to release the turntable.
4