Gamma Xenon Par Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungsanlagen Gamma Xenon Par herunter. Gamma Xenon Par 18 Seiten. Ip65 led par with motorized zoom
Please refer to the diagram below:
For installations where the DMX cable has to run a long distance or is in an elec-
trically noisy environment, it is recommended to use a DMX terminator. This
helps in preventing corruption of the digital control signal by electrical noise and
reflections. The DMX terminator is simply an XLR plug with a 120 Ω resistor con-
nected between pins 2 and 3, which is then plugged into the output XLR socket
of the last fixture in the chain. Please see illustrations below:
DMX Modes and Configuration
The Xenon Par has multiple DMX modes, sometimes called "personalities", "pro-
files", or as we will use here "modes".
In general, modes with more DMX channels offer a greater level of control or op-
tions but take up more of your output channels on your lighting console or soft-
ware.
Modes with less DMX channels often offer less control, but may be plenty for your
Depending on your needs and control solution, you may not need chan-
needs.
nels for automated programs, strobes, or macros – your console may have great
effects! In this case, you can use a lesser channel mode and fit more lights per
DMX universe.
8
View the DMX mode charts below to find the mode that best suits your needs.
channel and 17 channel are the most commonly used.
Xenon 7x20w Zoom Par – GAMMA LED Vision
Page 9 of 18