Gamma Xenon Par 사용자 설명서 - 페이지 9

{카테고리_이름} Gamma Xenon Par에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Xenon Par 18 페이지. Ip65 led par with motorized zoom

Please refer to the diagram below:

For installations where the DMX cable has to run a long distance or is in an elec-

trically noisy environment, it is recommended to use a DMX terminator. This

helps in preventing corruption of the digital control signal by electrical noise and

reflections. The DMX terminator is simply an XLR plug with a 120 Ω resistor con-

nected between pins 2 and 3, which is then plugged into the output XLR socket

of the last fixture in the chain. Please see illustrations below:

DMX Modes and Configuration

The Xenon Par has multiple DMX modes, sometimes called "personalities", "pro-

files", or as we will use here "modes".

In general, modes with more DMX channels offer a greater level of control or op-

tions but take up more of your output channels on your lighting console or soft-

ware.

Modes with less DMX channels often offer less control, but may be plenty for your

Depending on your needs and control solution, you may not need chan-

needs.

nels for automated programs, strobes, or macros – your console may have great

effects! In this case, you can use a lesser channel mode and fit more lights per

DMX universe.

View the DMX mode charts below to find the mode that best suits your needs.

channel and 17 channel are the most commonly used.

Xenon 7x20w Zoom Par – GAMMA LED Vision

Page 9 of 18