Major Manufacturing HIT-66-230 Anleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Schlösser Major Manufacturing HIT-66-230 herunter. Major Manufacturing HIT-66-230 8 Seiten. Template for best 34h-37h mortise lock

Seite drucken

Install the mortise lock posi-

tioning plate. The plate will

fit into the 1-1/4" x 8" face-

plate cut out. There will be

a 3/8" diameter pin

centered on the plate.

There is no top or

bottom to worry about.

Slide the HIT-66 template with the alignment

guide alignment pin and tighten to door.

Alternate tightening between the top and

bottom clamp. Do not attempt to tighten one

clamp all the way at once.

With a 3/8" twist drill,

drill the thru bolt

holes on both sides

of the door. These

holes go to the

mortise cavity. Drill

both top and bottom

holes on both sides

of the guide, do not

try to drill from one

side through to the

other.

PAGE 4