Major Manufacturing HIT-66-230 사용 설명서 - 페이지 5

{카테고리_이름} Major Manufacturing HIT-66-230에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major Manufacturing HIT-66-230 8 페이지. Template for best 34h-37h mortise lock

페이지 인쇄

Install the mortise lock posi-

tioning plate. The plate will

fit into the 1-1/4" x 8" face-

plate cut out. There will be

a 3/8" diameter pin

centered on the plate.

There is no top or

bottom to worry about.

Slide the HIT-66 template with the alignment

guide alignment pin and tighten to door.

Alternate tightening between the top and

bottom clamp. Do not attempt to tighten one

clamp all the way at once.

With a 3/8" twist drill,

drill the thru bolt

holes on both sides

of the door. These

holes go to the

mortise cavity. Drill

both top and bottom

holes on both sides

of the guide, do not

try to drill from one

side through to the

other.

PAGE 4