Major Manufacturing HIT-66-295 Anleitung Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Schlösser Major Manufacturing HIT-66-295 herunter. Major Manufacturing HIT-66-295 9 Seiten.
Seite drucken
Install the mortise lock positioning plate. The
plate will fit into the 1-1/4" x 8" faceplate cut
out. There will be a 3/8" diameter pin
centered on the plate. There is no top or
bottom to worry about.
Slide the HIT-66 alignment fixture over the
alignment pin and tighten to door.
Alternate tightening between the top and
bottom clamp. Do not attempt to tighten one
clamp all the way at once.
Start by drilling the 5/16"
diameter thru bolt holes
located around the spin-
dle. A standard twist drill
will work on both wood
or steel doors. Drill to the
mortise pocket from both
sides of the door.
Copyright 2016
Major Manufacturing Inc
PAGE 4