Major Manufacturing HIT-66-295 사용 설명서 - 페이지 5

{카테고리_이름} Major Manufacturing HIT-66-295에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major Manufacturing HIT-66-295 9 페이지.

Install the mortise lock positioning plate. The

plate will fit into the 1-1/4" x 8" faceplate cut

out. There will be a 3/8" diameter pin

centered on the plate. There is no top or

bottom to worry about.

Slide the HIT-66 alignment fixture over the

alignment pin and tighten to door.

Alternate tightening between the top and

bottom clamp. Do not attempt to tighten one

clamp all the way at once.

Start by drilling the 5/16"

diameter thru bolt holes

located around the spin-

dle. A standard twist drill

will work on both wood

or steel doors. Drill to the

mortise pocket from both

sides of the door.

Major Manufacturing Inc

PAGE 4