Major Manufacturing MCE-100 Wegbeschreibung - Seite 6

Blättern Sie online oder laden Sie pdf Wegbeschreibung für Schlösser Major Manufacturing MCE-100 herunter. Major Manufacturing MCE-100 10 Seiten. Mortise cylinder extension drill

Seite drucken

Major Manufacturing MCE-100 Wegbeschreibung

Tighten the mortise cylinder

in the clamp unit.

Drill both holes with a #29

drill bit. Adjust the stop on

the drill bit so the hole is

drilled to a depth of about

3/4" ( Adjust the stop so it is

1-1/4" above the tip of the

drill bit.) This will allow

plenty of room for to tap to

the depth needed without

bottoming out.

Remove the drill guide from

the cylinder clamp. Do not

remove the mortise cylinder

at this time.