Major Manufacturing MCE-100 Directions - Page 6

Parcourez en ligne ou téléchargez le pdf Directions pour {nom_de_la_catégorie} Major Manufacturing MCE-100. Major Manufacturing MCE-100 10 pages. Mortise cylinder extension drill

Imprimer la page

Tighten the mortise cylinder

in the clamp unit.

Drill both holes with a #29

drill bit. Adjust the stop on

the drill bit so the hole is

drilled to a depth of about

3/4" ( Adjust the stop so it is

1-1/4" above the tip of the

drill bit.) This will allow

plenty of room for to tap to

the depth needed without

bottoming out.

Remove the drill guide from

the cylinder clamp. Do not

remove the mortise cylinder

at this time.