Major Manufacturing MCE-100 Directions - Page 4

Parcourez en ligne ou téléchargez le pdf Directions pour {nom_de_la_catégorie} Major Manufacturing MCE-100. Major Manufacturing MCE-100 10 pages. Mortise cylinder extension drill

Imprimer la page

Ball bearing detent

one on each side

Install the proper cam driver

in place of the lock cam.

Use the screws provided,

the original screws will be

too short.

Install the drill guide plate

(gray plate) on the cylinder

clamp. Do not tighten the

mounting screws

( see arrows ) at this time.

The drive cam must be

installed at this time, it is

used to center the

mounting holes.

There are two ball bearing

detents inside the cylinder

clamp. The detents will

center the mortise cylinder

in the clamp.