- ページ 4

錠前 Major Manufacturing MCE-100のPDF 道順をオンラインで閲覧またはダウンロードできます。Major Manufacturing MCE-100 10 ページ。 Mortise cylinder extension drill

Ball bearing detent

one on each side

Install the proper cam driver

in place of the lock cam.

Use the screws provided,

the original screws will be

too short.

Install the drill guide plate

(gray plate) on the cylinder

clamp. Do not tighten the

mounting screws

( see arrows ) at this time.

The drive cam must be

installed at this time, it is

used to center the

mounting holes.

There are two ball bearing

detents inside the cylinder

clamp. The detents will

center the mortise cylinder

in the clamp.