KitchenAid 8285364 Installationsanleitung Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Kochfeld KitchenAid 8285364 herunter. KitchenAid 8285364 17 Seiten. 30" (76.2cm) and 36" (91.4 cm) electric built-in ceramic downdraft cooktop

Seite drucken
Electrical
connection
WARNING
Electrical Shock Hazard
Turn power supply off before
connecting wires.
Use 10-gauge solid copper wire.
Electrically ground cooktop.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
This cooktop must be connected to a
grounded, metallic permanent wiring
system or a ground connector should be
connected to the ground terminal or wire
lead on the cooktop.
This cooktop is manufactured with a frame
connected, green or bare ground wire. Connect
the cooktop cable to the junction box through
the 1/2" (12.7 mm) U.L.-listed conduit
connector. Complete electrical connection
according to local codes and ordinances.
5.
Make the electrical connection:
1. Disconnect the power supply.
2. Remove the junction box cover from junction
box inside cabinet.
3. Connect cooktop power supply cable to
junction box using a U.L.-listed conduit
connector. Tighten screws on conduit
connector.
4. Connect the two black wires together with
twist-on connectors.
5. Connect the two red wires together with
twist-on connectors.
6. Complete the electrical connection
according to local codes and ordinances.
(See "Wire connections chart.")
cable from fused disconnect
or circuit breaker box
junction
box
red
wires
green or
bare
ground
wire
green ground
appliance cable
wire
Figure 1
power supply
cable from cooktop
If local codes DO NOT PERMIT
connecting cooktop-ground
conductor to neutral white wire
in junction box:
(four-wire system)
7. Connect the green ground power
supply cable wire to the ground wire
in junction box or other ground
connector with twist-on connector.
See Figure 1.
8. Put a twist-on connector on end of
white wire.
9. Replace junction box cover.
Check operation
6.
Turn on electrical supply.
7.
Check that cooktop surface elements
heat and indicator lights are operating
correctly.
8.
Check that downdraft vent operates.
If the cooktop does not operate, disconnect the
power supply and check that wire connections
have been made correctly.
Wire connections chart
junction
box
white
wire
white
wire
black
green ground
wires
appliance cable
wire
U.L.-listed
conduit
connector
Figure 2
connecting cooktop-ground
7. Connect the green power supply
cable wire to the neutral (white) wire
in junction box with twist-on
connector. See Figure 2.
8. Replace junction box cover.
You have just finished installing your
new KitchenAid downdraft cooktop.
To get the most efficient use from
your new cooktop, read your Use &
Care Guide.
Keep Installation Instructions and
Guide close to cooktop for easy
reference.
cable from fused disconnect
or circuit breaker box
red
wires
U.L.-listed
conduit
connector
power supply cable
from cooktop
If local codes PERMIT
conductor to neutral
junction box wire:
(three-wire system)
black
wires
7